BGDVT - 5160-081,METHYL ALCOHOL
- MSDS: BGDVT
- Manufacturer: T R MFG INC
- Product Name: 5160-081,METHYL ALCOHOL
- National Stock Number: 6810-01-018-3288
Product Identification
Product ID:5160-081,METHYL ALCOHOL
MSDS Date:01/01/1985
FSC:6810
NIIN:01-018-3288
MSDS Number: BGDVT
Responsible Party
MAYWOOD, CA 90270-3020
US
Cage: 62901
Contractor
Cage: 62901
Ingredients
METHYL ALCOHOL (METHANOL) (SARA III)
CAS: 67-56-1
RTECS: PC1400000
OSHA PEL S,200PPM/250STEL
ACGIH TLV: S,200PPM/250STEL; 93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:EYE:IRRIT,SKIN:DERMATITIS.
VAPOR:HEADACHE,DIZZY,NAUSEA,NARCOSIS. INGESTION:BLINDNESS OR DEATH.
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MIN,CALL A PHYSICIAN. SKIN: WASH WITH
SOAP & WATER CALL A MD. INGESTION:GIVE WATER & INDUCE VOMITING, IF
CONSCIOUS,CALL A DOCTOR. INHALATION:REMOVE FROM EXPOSURE,GIVE ARTIF
RES P IF NEEDED,CALL A PHYSICIAN.
Fire Fighting
Flash Point:52F/11C
Lower Limits:6
Upper Limits:36.5
Extinguishing Media:CO*2,DRY POWDER
Fire Fighting Procedures:WATER SPRAY TO COOL EXPOSED CONTAINERS &
DILUTE SPILLS.
Unusual Fire/Explosion Hazard:VIOLENT REACTION WITH
CCRO*3(1*2+2H+5OH+H*GO),PB(CLO*4)*2,HCLO*4,P*20*3.
Accidental Release
Spill Release Procedures:ABSORB ON PAPER,EVAPORATE ON AN IRON PAN IN A
HOOD OR DILUTE WITH WATER & FLUSH TO SEWER. ELIMINATE SOURCES OF
IGNITION.
Handling
Handling and Storage Precautions:STORE IN COOL PLACE AWAY FROM
HEAT,SPARKS & OPEN FLAMES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:MECHANICAL
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD/GOGGLES
Other Protective Equipment:LAB COAT OR OVERALLS.
Supplemental Safety and Health
CONTAINER SIZE: GAL JUG
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:149F/65C
Vapor Pres:125
Vapor Density:1.11
Spec Gravity:0.79
Evaporation Rate & Reference:0.5(ETHYL ETHER)
Solubility in Water:COMPLETE
Appearance and Odor:CLEA, COLORLESS LIQUID,CHAR. ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Disposal
Waste Disposal Methods:ATOMIZE INTO A INCINERATOR OR DILUTE WITH WATER
& FLUSH SMALL AMOUNTS TO SEWER. COMPLY WITH LOCAL,STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.